COMPLETE RAYBESTOS PERFORMANCE DROP IN CLUTCH PACKS
TH400 HD 34 ELEMENT SPRAG
This is a heavy duty 34 element sprag for a TH400 transmission.
It is 100% stronger than stock and will eliminate or prevent sprag failure. Some 1971 and later may also reqire a direct drum change to install this sprag.
GM TH400 Bearing Kit
This bushing kit includes a, pump, case, extension housing, front stator, rear stator, both input sun gear, rear sun gear, reaction shaft front, reaction shaft rear, reverse drum front, and reverse drum rear
ALLOMATIC BRASS TRANSMISSION FILTER. FITS 1965-
TH400 THRUST WASHER KIT
A complete thrust washer kit for the popular GM and Chevy TH400 automatic transmissions from 1965-
Offers 4 levels of Performance: 1. Heavy Duty 2. Street & Strip 3. Full Competition 4. Manual Control At Any RPM
Transforms your automatic into a true performance transmission! * Offers super positive shifts * Separator plates included * Retains passing gear * Adjustable shift points 1. This TransAction kit will work on all 6 and 7 check ball cases. 2. Stage 4 delivers full manual control or manual low at any speed which increases the overall performance level.
UPDATED 4L80 DIRECT DRUM
BRAND NEW AFTERMARKET 4L80E DIRECT DRUM USED TO ADD THE HEAVY DUTY SPRAG AND EXTRA CLUTCHES FOR ADDED STRENGTH AND PERFORMANCE.
1 INCH FRONT CLUTCH BAND
4L60E TOLEDO OVERHAUL KIT FITS 93-
TOLEDO TTK IS THE BEST QUALITY OVERHAUL KIT ON THE MARKET.THIS OVERHAUL KIT WILL CONSIST OF THESE ITEMS;ALL THE RUBBER SEALS AND O'RINGS FOR THE TRANSMISSION.ALL THE PAPER GASKETS FOR THE TRANSMISSION.HIGH QUALITY TOP OF THE LINE FIBER PAN GASKET.
NOK FRONT PUMP HARD METAL CLAD SEAL.NOK REAR TAIL HOUSING METAL CLAD SEAL.
NOK COMPLETE SEALING RING KIT.PUMP NYLON OIL FILTER SCREEN.
GOVERNOR NYLON OIL FILTER SCREEN.TCC/PRESSURE NYLON OIL FILTER SCREEN.
NEW OEM SNAP RING FOR THE FRONT PLANET TO OUTPUT SHAFT. THESE ARE THE KITS THE PROFESSIONALS USE. DON'T SETTLE FOR LESS.
TCS HEAVY DUTY TH400/4L80 BILLET STEEL HUB
TH400/4L80 Billet Steel Clutch Hub
Made from 4140 HTSR billet steel to eliminate spline failures in high horsepower applications.
Two Torrington thrust bearings that replace the conventional thrust washers.
Designed to be used in applications over 600 horsepower.
No modifications required.
TH400 VACUUM MODULATOR
TH400/TH350 TRANSMISSION VACUUM MODULATOR, RED STRIPE
TCS HEAVY DUTY TH400 INPUT SHAFT AND DRUM
TH400 Heavy Duty Input Shaft and Refurbished Drum
The TCS Shaft is made from 300 Maraging steel. The spline area has been increased in size by 15% to provide greater drum/shaft contact and more strength. This is a 100% bolt-